Bars

Stainless Steel Bars, Hex, Square & Precision

A machine is shown with many pipes in it.

Stainless Steel Bars (Cold Drawn)

Applications :
Machined Components, Pump Shafts, Valves, Fasteners, Machine Tools, Dairy Equipments, Surgical & Medical Parts, Threaded Bars, Studs, Bolts, Pins, Hinges, and Handles.

Condition Cold Drawn E. Polished Cold Drawn, Centreless Ground Centreless Ground & Polished Cold Drawn, Centreless Ground and Polished (Strain Hardened)
Grades 201, 201Cu, 202, 202Cu, 303, 304, 304L, 310, 316, 316L, 321, 409Ti, 410, 416, 420, 420B, 430, 430F, 431, 630 (17-4 PH), 1.4410, 1.4418, 1.4462, 1.4122 & others
Diameter (Size) 2mm to 5mm
1/8” to 3/16” 		6mm to 25mm
1/4” to 1” 		10mm to 40mm
3/8” to 1-1/2”
Diameter Tolerance h9 (Din 671), h11
ASTM A 484 		h9 (Din 671)
ASTM A 484 		h9 (Din 671), M1
ASTM A 484
Length 3 up to 7 meters
12 upto 24feet 		3 up to 7 meters
12 upto 24feet 		3 up to 7 meters
12 upto 24feet
Length Tolerance -0/+200mm or
+100mm or +50mm
-0”/+1 feet or + 4” or 2”
And as per customer requirement 		-0/+200mm or
+100mm or +50mm
-0”/+1 feet or + 4” or 2”
And as per customer requirement 		-0/+200mm

-0”/+1 feet
And as per customer requirement
We can give Chamfering of 30 or 45 degrees on one or both ends with our dedicated chamfering machine.
For Strain-Hardened Bars, we can supply in B8(304) and B8M(316) in Class1 and CIass2.

Stainless Steel Bright Bars (Peeled/Turned)

Applications :
Machined Components, Fittings, Pump Shafts, Valves, Seals, Spindles, Fasteners, Machine Tools, Dairy Equipment, Threaded Bars, Studs, Shackles, Swivels, Screw Stoppers, Parts of Printing Press.

A man standing next to machinery in an industrial setting.
Condition Cold Drawn, Centreless Ground & Polished Peeled & Polished Peeled (Rough Turned) Forged (Rough Turned)
Grades 201, 201Cu, 202, 202Cu, 303, 304, 304L, 310, 316, 316L, 321, 409Ti, 410, 416, 420, 420B, 430, 430F, 431, 630 (17-4 PH), 1.4410, 1.4418, 1.4462, 1.4122 & others 303, 304, 304L, 310, 316, 316L, 410, 416, 420, 420B, 430, 430F, 431
Diameter (Size) 25mm to 85mm
1" to 3-1/4" 		85mm to 140mm
3-1/4" to 4-3/4" 		25mm to 140mm
1" to 5-1/2" 		150mm to 400mm
6" to 16"
Diameter Tolerance h9 (Din 671) ASTM A 484 h11 K12/K13 (Din 1013) -0mm/+3mm
(-0"/ +0.12")
Length 3 up to 7 meters
12 up to 22 feet 		3 up to 7 meters
12 up to 22 feet 		3 up to 7 meters
12 up to 22 feet 		3 up to 6 meters
12 up to 20 feet
Length Tolerance -0/+200mm or
+100mm or +50mm
-0"/+1 feet or
+ 4" or 2"
And as per customer requirement 		-0/+200mm or
+100mm or +50mm
-0"/+1 feet or
+ 4" or 2"
And as per customer requirement 		-0/+ 1000mm or
500mm -0"/+3 feet or
+2 feet
And as per customer requirement 		-0/+ 2 meter-
-0/+ 6 feet
A machine is shown with green walls and yellow frames.

Stainless Steel Hexagon & Square Bars

Applications :
Ball Valves, Needle Valves, Filter Valves, Connectors, Couplings, Plugs, Hose Ends, Manifolds, Nuts, Bolts

Type Cold Drawn and Polished Cold (Squares) Cold Drawn and Polished (Hexagons)
Grades 304, 304L, 316, 316L 304, 304L, 316, 316L 304, 304L, 316, 316L 304, 304L, 316, 316L
Diameter (size) 5mm to 40mm
(1/4” to 1 -1/2”) 		10mm to 40mm
(3/8” to 1 -1/2”)
Diameter Tolerance M1 ASTM A 484 M1 ASTM A 484
Length 3/4/6 meter
(1 2/14ft/20feet) 		3/4/6 meter
(1 2/14ft/20feet)
Length Tolerance -0/+500mm
(-0”/ +2 feet) 		-0/+500mm
(-0”/ +2 feet)

Stainless Steel Threaded Bars

Applications :
Ground Anchors, Resin Anchors, Rock Bolts, Tie Bars, Roof, and Hanger Bolts.

A machine that is in the middle of a room.
Condition Cold Drawn, Threading
Grades 304, 304L, 316, 316L
Diameter (size) M8 to 40mm (5/16” to 1 -1/2”)
Threading Method Thread Rolling
Thread Condition Fully Threaded
Thread Type ANSI B1.1 Class 2A Fit
Length 2/3/4 meter (6/12ft)
Length Tolerance -0/+200mm (-0"/+8")
A group of metal rods sitting on top of each other.

Stainless Steel Precision Bars

Applications :
Piston Rods, Pump Shafts, Boat Shafts, Cylinder Shafts, Precision Machined Parts, Automotive Components & Others.

  • Superior Surface Finish, Diameter Tolerance, & Straightness are achieved by additional processes, such as Straightening, Roller Burnishing, and Centreless Grinding.
  • Precision Bars are 100% inspected for diameter tolerance, out-of-roundness, surface roughness & straightness by specially designed instruments & gauges.
  • Ultrasonic Inspection is done to ensure bars are free from internal defects.
  • Bars are packed in strong plywood boxes, with each bar protected with distance rings to avoid scratches.
Condition Cold Drawn, Centreless Ground & Polished Peeled, Centresless Ground & Polished
Grades 303, 304, 304L, 310, 316, 316L, 410, 416, 420, 430F,431, 630 (17-4 PH), 1.4410, 1.4418, 1.4462, 1.4122 & others
Diameter (Size) 6mm to 25mm (1/4" to 1") 25mm to 85mm (1" to 3-1/4")
Surface Finish Upto Rms-12 max.
Upto Ra 0.2 max 		Upto Rms-12 max.
Upto Ra 0.2 max
Diameter Tolerance h7, h8, 17, 18
Half of ASTM A484 		h7, h8, 17, 18
Half of ASTM A484
Straightness 0.5 mm per meter TIR (0.0015 inch per feet)
Out of Roundness Half of Diameter Tolerence Half of Diameter Tolerence
Length 3 upto 7 meter (12 upto 22 feet) 3 upto 7 meter (12 upto 22 feet)
Length Tolerance -0/+50mm or+20mm or+10mm
-0/+2" or 1" or 1/2" 		-0/+50mm or+20mm or+10mm
-0/+2" or 1" or 1/2"
Heat Treatment Annealed/Quench & Tempered Annealed/Quench & Tempered

Stainless Steel Improved Machining Bars

Applications :
Precision Components, Machined & Turned Parts, Automotive Components.

  • We offer special grades of Stainless Steel Bars with Improved Machinability. These grades undergo the special melting process, Calcium-Silica (Casi) Treatment, and High Sulphur Contents are key characteristics of these grades.
  • During the Machining of components, these grades result in increased productivity, better tool life, and excellent chip breakage.
A close up of the wheels on a vehicle
Condition Cold Drawn, Centreless Ground & Polished Peeled Centreless Ground & Polished
Grades 303EHS, 416XM (Sulphur 0.30 to 0.35) 304, 304L, 316, 316L (Sulphur Min 0.015)
Diameter (size) 6mm to 25mm (1/4" to 1 ”) 25mm to 85mm (1" to 3-1/4")
Diameter Tolerance h9 (Din 671 ) ASTM A 484 h9 (Din 671 ) ASTM A 484
Length 3 up to 7 meters (12 up to 22 feet) 3 up to 7 meters (12 up to 22 feet)
Length Tolerance -0/+200mm or +100mm or +50mm
-0"/+1 feet or +4" or 2" 		-0/+200mm or +100mm or +50mm
-0"/+1 feet or +4" or 2"